GF BEARING-SINGAPORE LTD.

Oil Injection Systems,Supergrip Bolts

The oil-injection method used for removing the reusable bolts was pioneered by SKF. Originating in Sweden, this technology is based on nearly a half century of experience in the engineering and manufacture of couplings for the marine market, and since the late 1970s, for the utility industry also. Brochure: SKF Supergrip Bolt for rotating flanges.The hydraulic pump is connected to the center of the bolt. Oil is injected to release the bolt from the sleeve. The bolt slides out of the taper and the sleeve immediately regains its original diameter.

 

The latest generation of Supergrip bolt, for example, is based on the oil injection method developed in the early 1940s. The technology has been advanced over the years to develop different connection systems with new mechanisms to save time and money, while increasing safety across a wide range of applications.

 

SKF 22218 Bearing
3/4 in
Cast Bronze C93200 &
skf OKBS 128 Oil injection systems,Supergrip bolts
Snap-On
Polymer
skf OKBS 129 Oil injection systems,Supergrip bolts
28000 lbs
Separable Inner Ring
skf OKBS 127 Oil injection systems,Supergrip bolts
7.2500 in
Contact with Flinger
skf OKBS 126 Oil injection systems,Supergrip bolts
Double-Row Filling S
skf OKBS 124 Oil injection systems,Supergrip bolts
C0
17 mm
skf OKBS 134 Oil injection systems,Supergrip bolts
Click here
RBC®
skf OKBS 133 Oil injection systems,Supergrip bolts
Straight Bushing
49 N/mm²
skf OKBS 132 Oil injection systems,Supergrip bolts
C4
160 mm
skf OKBS 131 Oil injection systems,Supergrip bolts
Contact Seal
Four-Bolt Flange
skf OKBS 130 Oil injection systems,Supergrip bolts
124668
3.5625 in
Next page ▸
All Products Contact Now
Product Categories
Double Row Full Complement Cylindrical Roller Bearings
Four-Point Contact Ball Bearings
Four-Row Cylindrical Roller Bearings
Inch Tapered Bore Mounting Pillow Block SAF225 and SAF226 Series
Lock Nuts Requiring A Keyway (Metric)
Matched Single Row Tapered Roller Bearings Arranged Face-To-Face
Metric AH Withdrawal Sleeve
Metric AOH Hydraulic Withdrawal Sleeve
Metric H Adapter Sleeve
Metric Locknut
Miniature Ball Bearings (600, 610, 620, 630)
Needle Bearings-Heavy Duty
Needle Bearings-Thrust
Needle Roller Bearing-With Inner Ring
Oil Injection Systems,Supergrip Bolts
Power Transmission Seals,Axial Clamp Seals
Timken Bearing
Timken 18720 Bearing
Rw207ccra Bearing
Timken Hm803110 Bearing
Jh415647 Bearing