Lock Nuts Requiring A Keyway (Metric)
Lock nuts . Lock nuts requiring a keyway . Lock nuts with integral locking . Precision lock nuts . Engineered products . Backing bearings . Sensor bearing units . Motor encoder units . Roller encoder units . Steering encoder units . Rotor positioning sensor bearing units . Rotor positioning bearings . Hybrid bearings . Bearings Position the locking plate in the keyway. Tighten the nut further, if required, to align the holes in the plate with the holes on the side face of the nut, making sure that the plate maintains its position in the keyway. Screw both bolts into the side face of the lock nut and tighten them.
Locking plates engage a keyway in a shaft or adapter sleeve and are attached to the side face of the nut by two bolts secured with locking wire. A locking plate consists of a plate, two hexagonal head bolts with drilled heads and lock wire to secure them.Lock nuts requiring a keyway. SKF uses cookies on our web site to align the information shown as closely as possible to the visitors' preferences and to tailor our web site user experience in general.
- skf HME 30/800 Lock nuts requiring a keyway (metric)
- Bearings with Housin
- 76
- skf HM 31/500 Lock nuts requiring a keyway (metric)
- 120MM Bore 1; 123MM
- Single Row
- skf KM 38 Lock nuts requiring a keyway (metric)
- Flanged Pilot Type
- Bearings with Housin
- skf KML 28 Lock nuts requiring a keyway (metric)
- 5.467
- SCHAEFFLER GROUP
- skf HME 31/630 Lock nuts requiring a keyway (metric)
- 0.166
- CONSOLIDATED BEARING
- skf HM 30/1060 Lock nuts requiring a keyway (metric)
- N/A
- FAG BEARING
- skf HME 31/750 Lock nuts requiring a keyway (metric)
- 22215
- Cast Steel
- skf KM 30 Lock nuts requiring a keyway (metric)
- N/A
- AMI BEARINGS
- skf KM 32 Lock nuts requiring a keyway (metric)
- Bearing
- 4.528 Inch | 115 Mil